Qidi Tech 1 - Magnetic Side Door Clip

The side door handles supplied with my Qidi (May 2017) had a larger base diameter of 22.3mm however so I quickly modelled ITinSeattle's design. Work a charm, and figured I would upload for use by others with these newer type handles.

Ordered 5 x 1mm magnets off of ebay for very low cost. A good enhancement to the printer as the doors often went past the closed position, which this eliminates....as well as satisfying my OCD!

Raft optional - dependant on your confidence with your bed adhesion. Bottom is hidden by the door anyway so I didn't bother.

Print Settings

Printer:

QidiTech 1

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%