Parametic_PowerPole_Breakout_cascade_Remix

I made some changes to the openscad file. I was having problems getting the two side to join and be flush. I added CasewidthAdjusment variable so that the two side could be adjusted to give a little more room top to bottom for the powerpoles.

The image shown is of my first attempt. It is not the final project.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 5

Resolution:

High Quality

Infill:

20

Notes:

Printing a brim around the two halves will help in keeping the flat sides from warping.

I made these using eSun HIPS filament