Fertility Idol Remix

My goal was to hollow the model that it can be filled with sand to increase it's weight.

Two version available:

Split in 2 half for easy printing, but you have to accept the seam between the 2 parts. No matters if you exspect to post process the model.

Full hollow model but you have to choose a proper orientation and add custom supports in your slicer software

Also add a "Chachapoyan" style support

Print Settings

Resolution:

0.12 / 0.14

Infill:

20 / 25%

Filament: Eryone PLA Gold

Notes:

Print speed 30 / 40 mm/s.

Allow at least 2 days of printing time for a full scale model.

You have to print pins to center the 2 two half when assemblying, if you choose this version.

The same for the bottom filling plug for both version.