gridfinity 1x1 bin vase mode repeated print

LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely.

Attached is a hand crafted gcode-file that repeats the print when its done, clearing the build plate in between. For this to work you need a build plate that releases the print when it cools down, such as glass. printables does not support the G-code that is used for looping, M808, so it is commented out in the .gcode-file. In the .gcode, some minor optimizations are made, such as pre-priming and slowing down when printing the upper rim.