G29 Pedal Anti-Slip Pads

The G29 Driving Force Racing Wheel pedals are great, but the default anti-slip pads are a joke. They are completely useless when even a thin layer of dust comes between them and the floor. So I designed these anti-slip surfaces to keep the pedal board in place, and they work great. It is important to print 2 of the “back” plates, which screw into the built-in M6 threads, and one of the “front” plates- which is simply press-fit into the central three front holes. Without all three plates, the pedals will rock with any pressure on the front.

I have modified the clamps for the G29 wheel and shifter if you are interested, here are links to those files:

Wheel: www.printables.com/model/283635

Shifter: www.printables.com/model/283634

Files and Hardware:

Both parts are available in STEP format, in case modifying the parts for different screws head heights is necessary.

The silicone pads measure as follows and a link to the self-adhesive silicone sheet that I use is below:

Front: 215 * 30 * 2 mm (L*W*H).

Back: 225 * 30 * 2 mm (L*W*H)

Self-adhesive silicone sheet (2mm): https://www.amazon.de/gp/product/B071CGN92T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

M6 x 20 mm metric bolts: www.obi.de/gewindeschrauben/lux-zylinderkopf-gewindeschraube-m6-x-20-mm-verzinkt/p/6568133

Printing:

All parts print great with the standard Prusa Slicer “0.20 mm QUALITY” profile settings and no supports! I used a 0.6 mm nozzle, but any other size will be fine.

Nozzle: 0.6 mm

Layer Height: 0.2 mm

Supports: None

Perimeters: 4

Infill: 15%