Gardena Multi Connector
Easy to print Gardena compatible multi-connector with good water sealing.
32
127
0
1107
aggiornato
26 settembre 2022
Descrizione
PDFEasy to print Gardena compatible multi-connector with good water sealing.
The connectors are fitting tightly but are easy to connect/disconnect.
I only printed the 6 connectors version for a project.
The 4 connectors version is provided AS-IS and was not tested; it should just work though.
You have to add an O-ring for each connector otherwise this will leak.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
25%
Filament: Prusa PC Blend Jet Black
Notes:
- printed upright like on the slicer's snapshot 10mm brim to increase the contact surface with the printing bed without support thanks to the circular shape of the middle pipe. Support might be needed depending on your printer and filament 5 wall perimeters to avoid water leaks in the infill
Tags
Origine modello
L'autore ha contrassegnato questo modello come una sua creazione originale. Importato da Thingiverse.