PITFT70 V2 Mount

Mount for a BTT PITFT70 V2 and a Raspberry Pi 4

Screen mounts to the back half using the standoff and screws provided with the screen and the front is attached using 4x25mm M3 that cut their own thread, the rear mount uses 4x4mm M2.5 and 1 M4 of at least 25mm for the rear mount but I've included the .step file to make it suit. The fan hole is for a 30x10. Print 3 of each of the accents and the fit is tight enough to not need glue. You will also need a right angle adaptor for the USB-C cable.