Remixed Y rod stabilizer to fit the screw hole spacing on the upper Z rod covers. I found that securing the lead screws makes for instant Z wobble; just don't do it. The rods were experiencing a slight looseness of <1mm. The extra play has been eliminated at the top and bottom and I've never had smoother prints.
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.16mm
Infill:
10%
Filament: eSun PETG Silver
Notes:
Used a 0.4mm nozzle and 0.4mm wide 220C hotend, 70C bed, 36mm/sec, 75% speed outer perimeter
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.