Titan Aero with BLTouch Carriage Mount for ANET A8

Just did some minor mods around the BLTouch plate. Thanks to Bauschlumpf for the model to use!

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

15%

Filament: Inland ABS Blue

Notes:

Used a 0.4mm nozzle, hardened steel. 260c hotend, 110c bed printed at 36mm/sec with 24mm/sec outer perimeters.

Used three 100% dense support interface layers at 0.3mm separation on top of 15% support columns. Somewhat hard to remove from the model but it worked.

No cooling fan was used and the whole model was encased in a waterfall-type ooze/draft shield via Simplify3D. Warping was minimal.

Category: 3D Printer Parts