IKEA-style over door hook w/threads and screws

I modelled the hangers to include some M6 threads and I also made some printable M6x30 screws. There are three hangers with different tolerances for the screw/thread gaps. I also included the Fusion 360 file for further customization. If you want to modify the thread tolerances, go to Solid->Modify->Change Parameters and adjust the "threadOffset" to your desire value.

There was also a bit of chamfer and filet done to the face of the hanger to soften the hard edge.

Many thanks to dkozhemiakin for the original design!

Print Settings

Printer:

TRONXY X5SA PRO

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20% cubic

Filament:

White

Notes:

Printed all with five perimeters, top, and bottom layers. Hotend 250c, bed 75c, 36mm/sec base speed.

Print the screws with the bolt head face down. not as presented in the file. I also used a 5mm brim for adhesion.