Nerf 37 Shot Absolver Shell for 4" PVC Pipe - Updated

Edit: Updated the files with a new looser 13mm barrel fit that will still fit inside 4" pipe. The files included are outlined below.

• 37shot_13mm_shell_insert.stl - The base file. Just the barrels and meant to be used to make your own complete shell by mounting the insert in a piece of pipe or tubing of choice.
• 37shot_13mm_shell_insert.step - Same as above but in step for easy modification.
• 37shot_13mm_shell_capped - Same as the insert, but with a 10mm 102mm wide base. This will be a snug fit in 4" PVC(102mm vs 102.26mm). I do not recommend using this on its own, I recommend still using this to make your own complete shells with pipe, but the base will make centering it easier.
• 37shot_13mm_shell_capped.step - Same as above except in step for easy modification

Basic absolver design meant to fit snugly inside 4" PVC pipe and shoot 37 darts at once. Individual barrels have a .490" inner diameter vs .485" for CPVC. If you intend to use this, you will need something at least as powerful as a Titan or a drain blaster. This has not been tested yet.

Print Settings

Rafts:

Doesn't Matter

Supports:

No

Infill:

at least 10%