Desmond DMH-2 Tilt Head Spacer

This a mounting spacer for a Desmond DMH-2 Tripod/Monopod Tilt Head. It adds 24mm of height from the mounting point to the base of the tilt head. I created this to use on a motion slider so my pan/tilt controller would clear the rail in a steep vertical position.

Print Settings

Printer Brand:

Robo 3D

Printer:

R1 PLA Model

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: Hatchbox PLA