Dual magazine clamp for ARP-9

A dual mag clamp for the ARP-9 magazines.

It is based on the design of https://www.thingiverse.com/thing:2164860 but i made a new one to fit the ARP-9

The Wide version is a stronger version that wont grip over time as the normal one does. The problem with the normal one is that it warps over time and lose grip. The Wide on grips from the outside too, so the warping that do occur is not a problem, it wont lose grips as much, and if it does you can use tighten the screws. But i haven't felt the need for it after using it for more than a year.

Printed with PLA 0,2 (adaptive layers to help the shape of the screw holes)

20mm/s (can probably be printed faster)

You will need:

(Smaller Version)

2 x m3x35 (m3x30 should work as well)

2 x m3 nut

(Wide Version)

4-6 x m3x35 (m3x30 should work as well)

4-6 x m3 nut

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.2 adaptive layers to 0.04

Infill: 

40

Filament: PLA or PETG

Category: Sport & Outdoors