LW-PLA/PLA RC Plane - Pusher Propeller (PProp)

Hello There!

This Pusher Propeller (P-Prop) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA.  
 
(UPDATE 2/5/2023): A new wing design with support for a carbon fiber rod has been added (Wing Version D). The download is currently available at https://www.printables.com/model/392053-lw-pla-rc-plane-version-d-wing. 
 
(UPDATE 2/28/2023): All STLs have been repositioned where their correct printing orientation will be displayed upon opening the file.

Plane Specs

• Wingspan: 1165 mm or 45.86 inches
• Fuselage: 915 mm or 36.02 inches
• Estimated Print Weight: 208 grams (+/- 10 grams)
• Full load Weight: 378 grams (+/- 10 grams)
• CG Line: Located on Wing-Center in front of the 4th internal structure line (The small visible indented line on the wing-center).

Contained in the download you will be given:

• STL Files with internal structures
• Links to the shopping list and flight videos
• An invitation to the DISCORD support server

Provided through DISCORD:

• Pre-made assembly videos with youtube links
• Pre-made GCode Files for 200x200mm print spaces
• S3D FFF profiles for LW-PLA and PLA Printing

Below are some links for learning more about this plane, it is highly recommended that you check out the DISCORD server where you can find all the current links to build videos, flight videos, and Q/A help.

Shopping List:
Excel Sheet

Like what you see? Consider supporting me at:
Buy Me a Coffee

Flight Videos:
- Flight1
 

Final Note: Specs for CG, Weight, and dimensions are finalized. If there are any missing files from this webpage, please message me through the discord server by using the link attached to the highlighted DISCORD.