Sanding Wedge MK2

Sanding wedge allows use of standard sand paper sheets (11in / 280mm in length).
65
212
2
2483
updated October 19, 2022

Description

PDF

Reduced the overall length and material required to print.  Allows use of standard sand paper sheets (11in/280mm in length). 

Uses imperial hardware: 1/4-20 bolt 1.25" in length, ¼-20 nut.

Install bolt through knob and cover with knob-plug. Install nut on the base and cover with base-plug. 

Depending on your printer calibration, may need to adjust for a tight fit of the covers or drill holes. No glue required.

Printed using PLA at 0.3mm resolution. No supports required if printed in the orientation provided.

 

Model origin

The author remixed this model.

License