Esphome wheelie bin day notification

I'm really forgetful, so this visual cues is to notify me to take the rubbish out using Esphome and Home Assistant. 2 bins to the side for general wheelie bin and recycle bin, the middle cone is just a visual cues for other home assistant notifications.

Prints:

• Bin consist of the (bin, bin_lid and bin_lid_hinge). 
• bin_lid and bin_lid_hinge uses 3 small pieces of 1.75 filaments and maybe a dip of glue to hold together, it's not meant to be strong. Mainly for display only. Recommend using transparent filaments.
• Casing consist of the (board_case, board_case_lid and cover), board_case can be print with bridges or supports. The whole thing is friction fit.

Added step files so you can remix it and hold different number of LED or boards.

Build:

• I use a esp8266 board and 3 common 4-leg cathode LED ( with code: SKU077016)
• All 3 LED's red pins to D0, D1, D2. Green pins to D3, D4, D5. Green pins to D6, D7, D8. All 3 ground pins to GND pins

Code:

light:
  - platform: rgb
    name: "rgb-light-1"
    red: redgpio
    green: greengpio
    blue: bluegpio
  - platform: rgb
    name: "rgb-light-2"
    red: redgpio2
    green: greengpio2
    blue: bluegpio2
  - platform: rgb
    name: "rgb-light-3"
    red: redgpio3
    green: greengpio3
    blue: bluegpio3

output:
  - platform: esp8266_pwm
    id: redgpio
    pin: D0
  - platform: esp8266_pwm
    id: redgpio2
    pin: D1
  - platform: esp8266_pwm
    id: redgpio3
    pin: D2
  - platform: esp8266_pwm
    id: greengpio
    pin: D3
  - platform: esp8266_pwm
    id: greengpio2
    pin: D4
  - platform: esp8266_pwm
    id: greengpio3
    pin: D5
  - platform: esp8266_pwm
    id: bluegpio
    pin: D6
  - platform: esp8266_pwm
    id: bluegpio2
    pin: D7
  - platform: esp8266_pwm
    id: bluegpio3
    pin: D8