IKEA Table Linnmon/Adils Support Brackets

Hi 3D printing friends!  These are table support brackets that I used to attach my Ikea table (Linnmon, Item 16353)/legs (Adils, Item 22724) to the wall to limit my printer from shaking the table.  The Bambu Lab X1 Carbon moves quick and the inertia of the moving components was carrying into the table itself (even with a paving stone and thick foam pad under it).  

I used the leg of the table for the bracket attachment point as the table itself doesn't have much “meat” to screw into since it wasn't real wood.  

I printed this in Tough PLA at .3 layer height, 25% infill, and 3 walls.  

The screw and nut locations were sized for .190" DIA through hole and .375" Hex.  I used a NYLOC nut which worked well. 

Note: The short version fits the standard table and leg arrangement.  The longer version was for a custom distance from the wall based on my specific needs. 

Enjoy, and please share your makes!