Modular Pegboard Toolracks (EU Spacing)

A group of modular tool racks, designed for a metal pegboard with 6mm holes, 15 mm-center to-center. Each model shares the same size footprint, and is specially designed for, but not limited to, the following tools: Pliers, Screwdrivers, Files/Cables, Blades.

Due to the metal pegboard I have in my workshop, I used standard M6 metric bolts to mount them. As each workshop is individual, I have uploaded the surface models (STP file format), so you can customize the files for your own hardware setup as needed. 

I have also designed/printed/installed a version of these on an American pegboard as well (particle board 1/8“ holes, 1” center-to-center). The design uses zip-ties to fasten them to the pegboard, if you are interested please see the designs here: www.printables.com/model/281067

Files and Hardware:

All files are surface models (STEP), as you will likely want to customer the hole size for your individual pegboard. The holes are slightly ovalized to compensate for FDM printing process. I designed this with my Prusa MK3+ in mind, but this should be easy to print on any FDM printer with standard settings. All parts are optimally sized to fit on the MK3+ build plate.

Printing:

All parts print great with the standard Prusa Slicer “0.20 mm QUALITY” profile settings and no supports!

Nozzle: 0.4 mm

Layer Height: 0.2 mm

Supports: None

Perimeters: 3

Infill: 20%