cooler morpheus raijintek with 92mm fans

the support was made for the heatsink in question, mounted on a Tesla M40 nvidia, before with the 120mm fans it went to a maximum of 45/50 ° with this support for smaller fans, it went to 40/42 ° maximum,

P.S. I used the noctua 92mm slim fans, exactly the: Noctua NF-A9x14 HS-PWM chromax.Black.Swap

P.P.S surely there is to put some shims if in your case the heatsink is not as crooked as mine, I tried to make them but I did not need them, if in your case the heatsink is straight, it is better to put thicknesses of about 1.5mm

Print Settings

Printer:

JGaurora A5

Rafts:

Supports:

Yes

Resolution:

Infill:

5%

Filament:

crystalblue photo after print =================