French cleat for hanging IKEA Ribba picture frame

I use a large RIBBA framed picture to hide our unsightly electrical panel. However, it was always really annoying to rehang if we need to access the panel.

This cleat solves that headache. It's so easy to hang from the cleat and it feels very secure.

You'll need to print 2 (one for the frame, and one for the wall). The wall one has the angled face pointing up, and the frame one has the angled face pointing down. 

There are 2 3-mm holes to for nails to attach one to the wall. I used superglue to attach the other to the frame, just take your time to make sure to get the position/alignment is where you want it. Don't glue it to the outer part of the RIBBA frame, that will make it impossible to insert a different picture in the frame. You want to glue it on to the MDF backer.

It's probably oversized if you want to use this to hang a smaller frame, you could easily remix by shrinking it in the right direction in your slicer.