Ikea Skadis 10mm Adhesive Tape Big Thin Roll Holder

After trying hardly a convenient way to store/display my tape rolls on my Skadis boards and downloaded all what I found online, but that solutions had many issues: some was difficult to plug into the Skadis pegboard, some was too weak to hold large rolls, and most of them holds the spools sideways on the board and occupy a huge amount of space for few rolls. So I decided to design a large tape holder, then a smaller (this) one with the same expectations :

1. Easy roll insert and pick up operations 
2. Allows thin tape rolls with a diameter from 75 to 150mm.
3. Display in front to maximize the number of rolls on a smaller area
4. Plugs easily without damaging the Skadis boards

And, here it is ! The way it lays on the print bed allows flawless prints with a good strength on the hooks because of the diagonal orientation. I tried to reduce the amount of filament to minimal while keeping the maximum of strength. It prints relatively fast despite the display/holder dimensions.

Please print the larger face lying on the bed, like a pyramid. 

If you like it or if you're looking to a larger version, feel free to check my other designs: https://www.printables.com/fr/model/279708-ikea-skadis-50mm-adhesive-tape-roll-holder
https://www.printables.com/fr/model/279819-ikea-skadis-20mm-adhesive-tape-roll-holder