Servo frame for Corona DS239MG

A servo frame suitable for the Corona DS239MG wing servo. Optimal for gliders like f3b, f3f etc. or any other wing which is laminated in monocoque construction.

Since I used cfk-reinforced filament as the material, the part is optimized for printing with a 0.6mm nozzle.

Do not forget to shorten the screws before assembly so that they don´t damage the wings!

Print settings:

Material: CF-PLA

Nozzle: 0.6mm

Wall thickness: 1,8mm

Layer thickness: 0.2mm

Bottom layers: 4

Top layers: 6

Infill: 10%