This is a work in progress and you're welcome to remix it as you wish. If you are using a FDM printer, I would suggest printing it vertically so the curve prints nicer and you don't have to use supports.
I added a revised model name ending v3-2. The bulge is shorter, the NVMe area is a little taller and the overall width is a little larger. The picture of the cover in clear smoke is the updated model. It was printed with Siraya Tech Fast ABS-Like (80%) and Tenacious (20%). To attach it, I used a double-sided tape used for cellphone screens that is 1.5mm wide. It is very strong.
The author hasn't provided the model origin yet.