for the 1024x600 aliexpress.com/item/1005001709776554.html touchscreen from FYD Open Source Hardware shop with klipperscreen and raspberry pi on RatRig V-Core3
print with support for the upper 3030 connection part
print both flat, front with largest surface at the bottom
put the 4 included brass colored screw spacers on the 4 outside corners
screw 3030 part to front of printer with drop-in nuts and m5 bolts
squeeze hdmi and usb-c cable between sandwiched printed front/back
bolt front and back with m5x30 and m5 nuts
See newer version here: https://www.printables.com/model/561178-7-inch-touchscreen-holder
Printer:
RatRig V-Core 3 400
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
20
Filament:
Devil Design PETG
Category: 3D Printer Accessories
The author marked this model as their own original creation. Imported from Thingiverse.