AR-15 Bolt Face logo print modifier

In PrusaSlicer, for example, you can add it to your shape gallery.  It can be used in a number of different ways:

• Add as a "part" to emboss the logo onto a flat surface.
• Add as a "negative volume" to deboss the logo.
• Add as a "modifier" to print the logo in a different colour.

These same manipulations could also be done in the mesh editor of your choice, but I find it quick and easy to just do it in PrusaSlicer.

The model is 0.4mm thick, and approx. 100mm x 100mm. Scale it in your slicer to match your model.

Example shown is Samsung S10 Case by Christianoid, with the bolt face applied as a modifier on the bottom two layers, to render the logo in a different colour.