Ikea Skadis 50mm Adhesive Tape Roll Holder

I tried hardly a convenient way to store/display my tape rolls on my Skadis boards. I downloaded all what I found online, but that solutions had many issues. Some was difficult to plug into the Skadis pegboard, some was too weak to hold large rolls, and most of them holds the spools sideways on the board and occupy a huge amount of space for few rolls. So I decided to design a tape holder that :

1. Easy roll insert and pick up operations 
2. Allows large tape rolls from 75 to 135mm.
3. Display in front to maximize the number of rolls on a smaller area
4. Plugs easily without damaging the Skadis boards

And, here it is ! The way it lays on the print bed allows flawless prints with a good strength on the hooks because of the diagonal orientation. I tried to reduce the amount of filament to minimal while keeping the maximum of strength. It prints relatively fast despite the display/holder dimensions.

Please print the larger face lying on the bed, like a pyramid. The model do not need supports.

If you like it or if you need a smaller version, feel free to check my other designs: https://www.printables.com/fr/model/279819-ikea-skadis-20mm-adhesive-tape-roll-holder
https://www.printables.com/fr/model/280501-ikea-skadis-10mm-adhesive-tape-big-thin-roll-holde
 

Edit (2024/04) : 
Big thanks to 3DBenchy (https://www.printables.com/fr/@3dbenchy_1404880) for his excellent work in designing two versions that enable us to fit more rolls in a row by strategically placing the holding pins to eliminate gaps between the tape holders. It's a brilliant way to optimize your limited Skadis board space. Be sure to check out models A and B!