Iso-grid bookmark

The Iso-grid bookmark was born from me running out of filament and needing something to keep the pages of the book I am reading in check. Overall this model has a thickness of 1.5mm and weighs about 3 grams.

I recommend to print this model at a lower then standard layer height due to the 0.6mm fillets That the enveloping triangles have (Also this model is small so print time is not a big concern).  

PRINT SETTINGS:

• Resolution: 0.08mm
•  
• Walls: 3
•  
• Supports: NO
•  
• Infill: N/A
•  
• Nozzle Diameter: 0.4
•  
• Material: ASA