Stick-on kickstand for Steam Deck

Kickstand designed to be stuck to the back of the Steam Deck using strong double-sided tape (acrylic foam type tapes recommended). 

Offers 3 angles:

• nearly vertical
• ~25°
• ~50°

When installed the case included with Steam Deck will still zip-up but is suboptimal as the folded kickstand is 9.4mm thick so keep that it mind. 

Assembly: 

1. install the brace in to the lid by inserting it rotated, perpendicularly to the lid so one of the hinge protrusions matches one of the notches 
2. rotate until both protrusions match up with notches. 
3. repeat for lid and base

Installation:

• Using double-sided tape stick the kickstand centrally about 1mm under VALVE logo

Note: Do this before installing the base on the Deck as the slight flexibility of the base is required to fit the parts together

Note 2: assembly will require a bit of force, this is by design.

Does not require supports, just flip the lid so logo faces the table.