This is a funnel specifically designed for the Xmax v3 dry herb heater.
7
52
0
394
updated September 19, 2022

Description

PDF

Recommended Print Settings:

  • Around 0.175mm Layer Height
  • .4mm nozzle
  • 3 wall lines
  • Brim or Raft Enabled
  • Generate Support Enabled

 

Post Print Processing:

     Use a knife or tweezers to remove all of the support material and plastic hairs to prevent inhalation of microplastics.

     If the inside of the funnel is not completely smooth I recommend using sandpaper or a small coin to rub down/sand any high spots.

     After all of the debris/dust is washed off, the funnel is ready for use.

 

Customize to perfectly fit your grinder:

     If your grinder outer diameter does not match any of the STL files, you can follow these steps to parametrically change the funnel size.

  1. Download XmaxV3Funnel.f3d
  2. Open the file with Fusion 360.
  3. Select Modify → Change Parameters.
  4. Under User Parameters → GrinderDiamater, modify the Expression to the outer diameter of your grinder then click OK. I recommend adding 0.3mm to your measurement to allow for a low friction slip fit.
  5. Now in the browser on the left, go to Bodies then right click XmaxV3Funnel → Save As Mesh.
  6. Under format select STL(Binary). Under Unit Type select millimeter.
  7. Now click OK and save to somewhere accessible.

     Now you have a custom STL file that after slicing and printing should perfectly fit your grinder.

Model origin

The author hasn't provided the model origin yet.

License