Modular Raspberry PI NAS Case for 2.5 inch SSDs

Description

This design was inspired by Szmalus' excellent design:
https://www.thingiverse.com/thing:3850735
However, it didnt feature a fan mount and the SSDs were needed as a structural element of the case. Since I often need to swap SSDs and need a place to mount my fan, I designed a new case.

Features

• Slim: The rack is only 4mm wider than a 2.5" SSD and as long as a 2.5" SSD
• Modular: 2-bay and 4-bay version available, each with or without fan mount
• Accessible: All Raspberry Pi ports/pins are accessible without the fan
• Ease-Of-Use: Small nobs secure the SSDs without screws for quick swapping

Compatibile with:

- Raspberry PI 1B+/2B/3B/3B+/4B
- 2.5 inch SSDs (7mm height)
Note: The spacing between the two SSDs is 5mm. Make sure you are not using thick SATA to USB adapters!

Assembly, printing and sourcing details can be found on github

https://github.com/lspr98/raspberrypi-nas