happy grandparents - tablet holder

Stay in touch with your grandparents and teachers.

My son loves talking to his grandparents on the iPad. However, it was always difficult to find the correct position for the tablet. Sometimes it's too steep, sometimes too flat. And talking with his brother next to him, he wants to switch to landscape mode.

So I decided to design this stand for tablets.
It is bendable back and forth, the tablet can be rotated very easily and it is easy to print.

I did my best to make this possible on the Prusa Mini.

Print instructions

Material List:
1 M4x16 (or longer) Cap Head screw
1 M4x60 (or longer) screw
2 M4 Locknuts

Material:
whatever you want

print instructions:
default Prusa Mini settings in PrusaSlicer.

print settings:
0.20mm SPEED

shanges for all stl's:
4 perimeters

changes, foot:
finfill to 40% to gain weight

changes, arm:
rotate the arm 45°
change infill angle to 0°

changes, bracket:
disable skirt