Lens Cap Holder Generator

I designed this OpenSCAD generator to create a lens cap holder to fit the camera strap. 

It features:

• any cap diameter from 35mm to 100mm
• any strap width from 5mm to 28mm
• any strap thickness from 1mm to 3mm
• a range of heights and thicknesses
• capable of hooking over a strap with thick ends

It works on my Nikon and should work for other models. For reference, the included STL's are for a 67mm cap and strap with 8mm and 28mm sections.

It is a fast, easy print with no supports. I printed in PLA, but you may want to consider tougher filament if ruggedness is a concern.

Inspired by:

https://www.thingiverse.com/thing:1252503

https://www.printables.com/model/234940