Key Organizer

Description

An easy to print key organizer. The .step files are also uploaded for anyone who wants to customize the model. 

Manual

1. Print one of each side panels(the slime or normal ones)
2. Calculate the hight you need for the spacer (all key hights+washers)
   • For my keys it was best to use washers on both sides of every key
3. Use the spacer nearest to your needed hight and sclae it to your need(y direction)
4. Print the spacer
5. Cut the screws in your needed length(or use screws that fit if you have one)
6. Insert the M3 nuts in side_panel_with_nuts
7. Insert the screws in side_panel_with_screws
8. Insert the spacer and stack the keys and washers on the other side
9. Screw all parts together using loctite/superglue
   1. On the key side screw until  the resistance of the keys is comfortable.
   2. On the spacer side screw tight.

Materials

3x M3 screws

M3 washers or even better some spring washers

loctite/superglue

a keyring

Links

Shopping - Cart coin