Oral-B Brush Organizer and EnergySaver

4 Person toothbrush-holder, to help get rid of multiple electric adapters and to help organize your bathroom table.

Print instructions

Print you own 4 person toothbrush-holder, to help get rid of multiple electrix adapters and to help organize your bathroom table.

This is version 2.0 of the model, my original design, crafted in Fusion 360, and printed on a noname 3D printer.

The assembled organizer takes one standard Oral-B wireless charger, end embed it into the 2 separate 3D printed pieces, which you will find in the download section as .STL files.

I have been using version 1 for about a year now, and this new version was created to enforce the sides of the Box part, that had morphed slightly over time from usage, due to a thin layer of PLA.

In terms of energy savings, one wireless charger takes continually about .6 to 1.0 Watt while charging a fully charged toothbrush, so the saved energy is very small. Once you have rotated your toothbrush into the charger, one charger can easily keep 4 batteries charged, and the batteries last longer(my observation after 1 year trials)

In terms of organizing, the wires and splitters to be able have 4 single wireless chargers standing together takes up a lot of table space, and are nearly impossible to organize neatly. This organizer really helps fixing that specific problem.

I printed this model with PLA, a 0.4 nozzle, 40% infill, 0.2mm layers, and 3 layers on top/bottom/sides.
The Two .STL files are straightforward and simple to print, and requires no support.