Filamentspule für Refill-Filamente (Mutterspule)

Einfache Filamentspule aus zwei Passteilen für die Aufnahme von z.B. eSun Refill-Filament
1
34
1
308
updated September 15, 2022

Description

PDF

Filamentspule aus zwei Passteilen für die Aufnahme von z.B. eSun Refill-Filamentspulen.

Benötigt werden außerdem:
2 x Innensechskantschraube M5 x 60
2 x Mutter M5

Den Druck habe ich mit den Voreinstellungen 0,2 (SPEED) des Prusaslicers für den MK3S+ gedruckt und war mit dem Ergebnis da schon so Zufrieden, das ich nicht lange rumprobiert habe. ;)

====================================================================

Filament spool made of two components for holding e.g. eSun refill filament spools.

Also required are:
2 x M5 x 60 allen head screws
2x Nut M5

I printed the jerk with the default settings of 0.2 (SPEED) of the Prusaslicer for the MK3S+ and was so satisfied with the result that I didn't try it out for long. ;)

Tags



Model origin

The author hasn't provided the model origin yet.

License