Waveshare 4.3" - Raspberry Pi 4 Case

Built a tight case for the Waveshare 4.3" HDMI touch display and Raspberry Pi 4. I use this combination to control my i3MK3S 3D printer. Touch display is working nicely with Octodash.

An axial fan (30x30x6 mm, 5V; reichelt.de part# SUN MF30060V2-1) may be mounted on the back of the case.

Material:

3 mm Tap drill

Screws:

• 4 p M3x8 Countersink
• 4 p M3x20 Countersink
• 1 p M3x16 Socket head cap screw (Zylinderschraube)

Printing:

• Layer height: 0.2 mm, 0.15 mm for PushButtonArray
• Supports for PrusaFrameHolder (everywhere) and RPI_BottomLeft (on build plate only)