Silencer .22 model

This is a .22 suppressor model and it can be printed as a complete or as a cross section model, where you can see the inner workings. All models have a 11mm mounting hole and a 6.5mm minimum baffles diameter. (Larger for the first couple of baffles)

• The Mark 3 model is similar but with thicker walls and different exterior design. Also, some modified .stl-models have been uploaded by request.
• The Mark 4 model has an enlarged expansion chamber and a new exterior.

If you are as confused as me when looking at all the different variants, just go for the [Original].

You can see it being printed on: https://www.youtube.com/watch?v=usCJrE0boEU

Feel free to post you prints!

*Intended only too be used in educational purpose...

This is my original drawing with inspiration taken from real silencers and the design of the model is made to be extra printer friendly with no bridges or steep slopes. STEP, .OBJ and .3dm-files are also provided for you to customize the models.