70mm Fan Shroud

TLDR: couldn't find one that I liked, so I made one :-)

Designed using Fusion 360,
The Total Dimension: 70x70x5mm (60x60mm between screw holes)

Screw Holes: self-tapping 5.5mm Dia (based on typical screws for PC Fans)

Print Settings Used:

Layer Height: 0.2 or 0.3mm

No Supports

• Around 1hr 40mins @ 0.3mm 50mm/s
   

Future Plans:

Only a 5mm thick version is currently uploaded, plans to quickly put together a 2.5mm thick version 

Please give any feedback, was designed as a favour for a friend.