STL model and Cura project of "Quieter Ender 3 V2 Fan Shroud"

If you liked this remix please give a like ❤️, share 🔗 and upload your make 📷 !

I'd be very thankful to hear from your advice to get some feedback and improve as well.

I've exported the STL model from the PrusaSlicer project uploaded by @iRndmz so that anyone who uses a different slicer from Prusa's (like me) can still use its own favourite software for printing this awesome model - specially noticing that Creality printers' official slicer is Cura.

Taking into account the modifications introduced in the original PrusaSlicer project - which only consisted on setting wall speeds on the clip zone at 10 mm/s -, I've also uploaded a Cura project (.3mf format) with that same modification. Therefore, I can share with you the profile I've used to print this cover as well.

For those of you who may want to know more about the printing profile I've used for this print, it's based on CHEP's YouTube channel lastest Cura 5.1 profiles - in this case, based on its “0.2 - good quality” profile. Here is a link to his video. However, I've implemented some variations such as reducing significantly the overall speeds as well as setting suitable temperatures for PETG. - they may be quite conservative because it is my frist print with PETG. 

Heat bed is only enabled during the first layer in order to try to save some electricty, as it's one of the systems that consume most power during a print. I suggest applying some glue stick to your glass bed in order to guarantee proper bed adhesion, as well as protecting it from getting damaged by some PETG too-well sticked.

Basic print settings: Same as the original model.

Enjoy!