microSD card rack and label card holder

Maturity: Very good.

• 9 prototypes.
• In use since 2020/11.

You can add a written description of what is on your microSD card on a sheet inserted in the card holder. At least 200g/m² for the paper weight is nice.

I published different size of holders:

• 60x40 (small one)
• 70x42.5 (the one for the Rack)
• 85x55 (business card size)

I provide now holders with one or two SD card slot (double).

The size 70x42.5 is my initial size. Sheet inserted is then about 50mm x 37.5mm . I choose that dimension because it is a 150mm x 100mm sheet cut in 8.

File description:

• RackPorteCarteSD-r00a - I3D-1 is the box
• RackPorteCarteSD-r00a - I3D-1 is the bottom of the box
• Intercallaire-r00a - Defaut is the separation between holders
• PorteCarteSD-xxxxxxxx is the microSD card holder

PS: I can design other dimensions if you require it.

Log:

• 2023/01/13: Add other sizes and with double SD
• 2022/09/14: Small change in SDcard holder and center the card notch.
• 2022/09/12: Initial publication