This is a tool box that hangs off of the left side of the Prusa mini base. This should be able to hang over the upper most lip of the left side legs and hold in place under the ribbing along the side. It is slightly longer then the original one I designed for the right side.

How to install:. This actually a very tight fit. First you need to have the prusa mini stand. This box hangs over the lip provided by the left front and back leg.. It will hang over the lip of the main two pieces and snaps in, providing not only a container to hold your most common tools, this is also a stiffener for the joint connection of the two leg leg sections. If you feel you are providing too much pressure installing this, give it some light sanding on the upper slot, and the lower lip of the box. Unlike the right side box, this box will have more conflict with storage with the heat bed overhanging over a portion of the opening. Nonetheless, this should be good storage for less frequently used tools.