This lantern model was created in respectful observance of the 20th Anniversary of the September 11 attacks.
One of MiniWorld3D's objectives is to share buildings of historical significance in an accessible 3D printable form, for the world's education and appreciation. We would like to dedicate this model to the victims' memory and their families.
🕯
.
This model comes in different versions, including:
It was created by MiniWorld3D founder Dany Sánchez. It also includes a base that can hide batteries and cables, detailing the original WTC complex and Austin J. Tobin Plaza, made in collaboration with José Luis Ruiz López.
- - - - - - -
The original World Trade Center was a large complex of seven buildings in Manhattan, New York City, United States. It opened on April 4, 1973, and was destroyed in 2001 during the September 11 attacks. At the time of their completion, the Twin Towers were the tallest buildings in the world, with the North Tower reaching 1,368 ft or 417 m (without the telecommunications antenna).
Its revolutionary design and construction method were conceived in the late 1960s and early 1970s by Minoru Yamasaki as lead architect and Emery Roth & Sons as associate architects. It was commissioned by the Port Authority of New York and New Jersey.
On the morning of September 11, 2001, two hijacked airplanes were deliberately crashed into the Twin Towers; less than two hours later, both towers collapsed. There were more than 2,500 victims.
The cleanup and recovery process at the World Trade Center site took eight months. A new World Trade Center complex is being built with six new skyscrapers and several other buildings, including a memorial and museum.
One World Trade Center, the tallest building in the Western Hemisphere, has the exact same height that the North Tower had (without antennas).
During its existence, the World Trade Center was an icon of New York City and pop culture (from Wikipedia).
MiniWorld3D is humbled to bring this model as a homage to all the people of New York City. This model was designed from scratch, no scans or repurposed models, so it's pristine clean for 3D printing. Please credit MiniWorld3D when printing and sharing this free model, it's all about spreading culture and education.
Consider supporting us on Patreon!
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG!
MiniWorld3D is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world.
Photos by Dany Sánchez, José Luis Ruiz, Ellias Deloris, and Viridian.
-----------
Suggested parameters:
For better details, print slow, such as 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 12%
No supports, optional raft or brim.
4 Versions provided, labeled as follows:
Files are optimized for FDM but have been proven to work perfectly in resin.
The base files are provided separated and together, for you to print as you prefer. Use any means of lighting such as batteries, LED strips or tea lights, which can be hidden under the base. Scale up in Z the base wall to achieve any height required to hide lighting components.
The author marked this model as their own original creation.