TronXY X5SA PTFE Tube Guide (Version 2)

This is the version 2 of a simple guide that strengthen the PTFE tube at the
extruder output of a TronXY X5SA printer. You will need a M4 x 12 mm screw
along with a M4 T-nut.

Support material is not required. An infill of 20% is recommended.

This object main web page is:  
http://www.ctheroux.com/tronxy-x5sa-ptfe-tube-guide-version-2/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.