Baby Change Station Rail

A baby change station safety rail for grounded maker-parents.

It makes sure your baby stays put.
Or at least has something to grab on to if they've started to move a bit.

Here's a fun little video session I made of building it:
Part 1: https://youtu.be/Yh4RCveVTh4
Part 2: https://youtu.be/q2CUUd5WNSc

All you need is filament, some rods and some small screws.
If your rods have a different diameter, you can scale the prints.

And feel free to help other parent friends in need ;-)

Hope you like it!

Print instructions

Attached you will find the STL where all elements fit nicely on the build plates.

You will also find a picture with all rod measurements. You can adjust these to fit your exact pillow.

Feel free to remove the ones you don't need.

Using a .4mm nozzle, please make at least 3 perimeters.

If you plan to use it for kids more than a year old, you might want to beef up the slicing and use petg to make it playground-strong :-)

Happy printing!