MKS-Pi + TS35 box

Used material:
6x DIN 912 M3x10 - 4x for TFT, 2x for cable winder
4x DIN 7380 M2.5x6 for MKS-Pi (or any other similar screws)
10x M3 heat inserts - 4x for TFT, 2x for cable winder, 4x optional for mounting.

I plan to add MKS-Pi + TS35 on my delta so i designed this box. Bottom of the box has 4x M3 heat insert 67x40mm for further mounting but I didn't designed any mount yet. Box is opened because of Pi cooling.

I was annoyed by long TFT cable so there is very useful simple flat cable winder.

It was designed in FreeCAD

EDIT: I modified TFT frame, it was very tight. I added +0,2mm space for all four walls