Peg board Drone mount: Updated

I found a nice wall mount from @snappydiy and made a few changes to suit my needs.  This will mount on most pegboards and comes in two sizes, normal and deep.  FPV drones with under-slung electronics stacks like the Catalyst Machine Works Shocker, will need the deep version, all else can use the normal.  Tested on Babytooth quads all the way up to 7inch LR cruisers.

I recommend printing 30% infill and use the slicer to increase the pegs and where they mount to the model at 100% infill.  

Supports needed from the base to the top peg mounts only.

UPDATE: Added a no logo and “Drone Parking” version as well.