Silicone Hose Extruder

Make your own silicone tubing and gasket on demand.

With this 3D printed item, a silicone gun and a 100% clear silicone (see attached pictur) one can extrude 10 mm (inner diameter) silicone tubing. As long as the silicon is fresh there is no limit as how much tubing one can extrude. (a bucket with warm water mixed with Hydrogen Peroxide is needed for the extruded silicone hose to be cured and its shape preserved.

The resulted silicon tube could be used in numerous DIY projects.
Also, it could be integrated in a mechanical ventilators, air pumps, water pumps were custom tubing is needed.

Contact me trough the comments section or the link shown below, if you need help with other silicon sizes/diameters stl files.
https://www.etsy.com/ca/shop/SvgPal?ref=seller-platform-mcnav

Print instructions

For prototyping I've used PLA and works just fine.

0.20 mm first layer 0.15 mm next layers.

5 mm skirt