Star Wars Jedi Order Extruder Visualizer

Star Wars Jedi Order Extruder Visualizer 3D printed in 2 colors, white and black.

I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert a filament change command in the G-code so I could change the color. It can be done very easily in the PrusaSlicer.

I separated the magnet post so I could print without supports. The post needs to be glued to the back with super glue.

The magnet used is 6.3 mm diameter by 3 mm thickness. They were purchased from Michaels Craft Store.

It was brought to my attention that the new Prusa printers, probably starting from beginning of 2021, the metals in the stepper motors are non magnetic. I would advise to test with a magnet to see if the visualizer will stick to the stepper motor.

Print instructions

Printer brand:
Prusa

Printer:
I3 MK3S

Rafts:
No

Supports:
No

Resolution:
.15 mm

Infill:
15%

Filament_brand:
Prusament

Filament_color:
Vanilla White & Prusa Galaxy Black

Filament_material:
PLA

Notes:
Added brim for the magnet post so it would have more surface area to stick to the print bed. Also, the post prints at 100% infill.

Post-Printing
Magnet Post need to be super glued to the back. Magnet needs to be supper glued to the post.