Faux Fox Keyboard (FFKB) High and Low Profile Case

This is a case for the FFKB by Fingerpunch. It prints in 5 pieces to fit on an Ender 3 or other similarly sized printer.

UPDATE: I made a 5-col version for all you crazy 5-col users.

UPDATE V4 Sept 6, 2022: Cleaned up the file names and versions, added multiple encoder/no encoder options, more mid section options (no frills, cirque, ec11, and trackball), high pro and low pro, hopefully improved the stability of the base for two part prints, added unibody options for those with large printers, added wireless support for JST connector and lipo batteries up to 1200mah.

UPDATE V4 Choc Sept 11, 2022: Added choc variant for 6 col builds. So far only mid pieces for EC11 encoder and cirque. Only magnets to fasten this version with 6mm x 2mm magnets.

UPDATE June 7, 2024: Added step file for choc version

There are two options for fastening. It accepts 6mm x 3mm magnets to fasten the pieces together. Or, the two top pieces accept m2 heatset threaded inserts to attach the bottom to the top. Then the middle piece would require magnets to snap into place on top. The keyboard pictured is secured with the m2 heatset inserts and the mid piece is kept in place by the encoder and a slight friction fit. I will install the magnets on the final version.

I have modeled the top middle piece for an encoder. I have a second model for an OLED but it is untested.

Magnets:

6x3 mm: https://www.amazon.com/gp/product/B07KZQGWNN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

6x2mm: https://www.amazon.com/gp/product/B07XRQ44VC/ref=sw_img_1?smid=A1WRXEAV8JT169&th=1

3x2 mm: https://www.amazon.com/200Pcs-Magnets-Miniatures-Refrigerator-Whiteboard/dp/B09NRH97D9/ref=sr_1_6?keywords=3mm+magnets&qid=1648967669&sr=8-6

Inserts: https://www.amazon.com/gp/product/B08ZJ5WHYN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1