Prusa Face Shield - Stack ver.
Description
PDF1h 20min per pcs
Stacking versions of Prusa Protective Face Shield - RC3
A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health.
Provided G-codes are only for Original Prusa i3 MK3/S printers. Do not run the G-codes on other printers. Risk of damage.
We provided two options, including reinforcement parts:
- 4 pcs on the print bed (2 stacks, each with 2 headbands)
- 8 pcs on the print bed (2 stacks, each with 4 headbands)
Version RC3.2 - 1. 4. 2020
We uploaded new 3MF files and G-codes that have increased infill in the spot, where the visor goes away from the headband. The STL file remains unchanged.
</br>
Version RC3.1 changelog
Changes from RC3
</ul>
</br>
The printer will be running at increased speeds. Expect louder operation and make sure your printer is in good shape before running this G-code. Check the Maintenance guide.
Print instructions
Supports are included in the model.
Print with at least 2 perimeters, and 5% infill. The model is optimized for a layer height of 0.25mm.
Print it from PETG, headbands from other material can be brittle with these print settings.
Model origin
The author remixed this model.
